Oximo 50 S Auto RTS
Short motor for roller shutters equipped with stoppers and rigid straps.
Product features
• Intelligent obstacle detection in both the up and down directions.
• Motor stops if the shutter is frozen up.
• Automatic maintenance cycle (monthly with automatic adjustment of limits – the roller shutter always opens and closes perfectly).
• Recommended wireless controls:
– Wireless timer Chronis Comfort RTS with/ without light sensor.
– Wireless sun sensor Sunis Indoor WireFree RTS.
– Wireless sun and temperature sensor Thermosunis WireFree RTS.
• Complete series of tubular motors, series 50: 6 Nm to 40 Nm.
• Quick installation through unique clip system.
• Compatible with the Sunis WireFree sensor RTS.
Product benefits
• Tubular motor 230 V/ 50 Hz with external printed circuit board.
• Reception range: 20 metres through 2 concrete walls.
• No setting required, only set the direction of rotation.
• Option to combine with wireless timer.
• Possibility to set intermediate position.
• 1 Oximo S Auto RTS tubular motor can be controlled by a maximum of 12 RTS controls.
• Not applicable with relay boxes, standard switches and standard controls.
• Fits in a tube with a minimum inner diameter of 47 mm.
• Limit switch capacity 200 revolutions.
• Supplied as standard with Oximo RTS module, with a white 3-core (VVF) cable, 3 m long and a cable with motor plug.
• Not suitable for continuous use.
• Can motorise a roller shutter from 425 mm.
• Motor stops with obstacles or if the shutter is frozen up.
• Recommended wireless controls:
– Chronis RTS timer.
– Sunis Indoor WireFree RTS.
– Thermosunis WireFree RTS.
• Quick installation through unique clip system.
• Compatible with the Sunis WireFree sensor RTS.
Oximo 50 S Auto RTS motors with standard RPM (rev/ min.)
| Type of motor | Torque (Nm) | RPM (rev/ min.) | Tensile strength with tube (kg - ø mm) | Reference number |
|---|---|---|---|---|
| Oximo S Auto 6/ 17 RTS | 6 | 17 | 24 - ø 50 | 1 130 128 |
Main technical data:
| Oximo RTS 6/ 17 | |
|---|---|
| X = motor length (mm) | 355 |
| Y = drill distance (mm) | - |
| Torque (Nm) | 6 |
| RPM (rev/ min.) | 17 |
| Tensile strength of tube ø 50 mm (kg) | 24 |
| Limit capacity (rev.) | n.v.t. |
| Tolerance | <±3° |
| Power (Watt) | 90 |
| Voltage (Volt) | 230 |
| Current (Ampere) | 0,45 |
| Maximum run time (min.) | 2 |
| Maximum motor temperature (°C) | 140 |
| Minimum tube diameter (mm) | 50 x 1.5 |
| Weight (kg) | 1,25 |
| Length of the cable (m) | 3 |
| Number of cores | 3 |
| Diameter of the cores (mm2) | 0,75 |
| Protection class | IP 44 |
| Minimum/ maximum environment temperature (°C)) | -10/+40 |
