Switch with built-in receiver for Venetian blinds, Centralis Uno RTS VB
Can be combined with 1 standard tubular motor.
Can be controlled with all RTS controls and with the Soliris sensor RTS, Eolis sensor RTS, Sunis WireFree RTS and Eolis 3D WireFree sensor RTS.
• Provided with a switch on the receiver itself.
• No wiring between the receiver and any additional RTS control points.
• Can be combined e.g. with remote control and/ or wireless switch.
• 2 interim positions can be programmed.
• Can be switched off for receiving wireless control signals with the sliding switch (except for priority wind command).
• Tipping function cannot be switched off.
Main technical data:
|Power voltage:||220-240V ~ 50/ 60Hz|
|Index protection:||IP 40|
|Operating temperature:||-10°C to +40°C|
|Reception frequency:||433.42 MHz|
|Output delay time:||3 minutes|
Switch with built-in receiver
|Centralis Uno RTS VB||1 810 219|
|White mounting box||9 102 073|
|Grey mounting box||9 102 004|
Wireless control points
(to be ordered separately)
|Telis 4 RTS Pure||1 810 631|
|White, including wall button.|
|Telis 4 RTS Silver||1 810 638|
|Silver, including wall button.|
|Telis 4 RTS Patio||1 810 644|
|Blue/ white, shock and water resistant. Incl. wall button.|
|Telis 4 RTS Lounge||1 810 651|
|Black design finish. Incl. wall button.|
|Centralis RTS||1 810 090|
|Wireless wall switch.|
|Battery||9 011 651|
|Type CR2430 sold in packs of ten.|
Application e.g. of Telis 4 RTS, Inis RT, Telis Composio RTS and Impresario Chronis RTS is also possible.